Juniper Networks Network Router ERX 310 User Manual

About This Guide  
This E-Series Installation and User Guide provides the information you  
need to install and start the E-series router.  
Note: If the information in the latest E-series Release Notes differs from the  
information in this guide, follow the E-series Release Notes.  
The E-series router is shipped with the latest system software installed. If  
you need to install a future release or reinstall the system software, refer  
to the procedures in Appendix B, Installing JUNOSe Software.  
E-Series Routers  
Five models of E-series routers are available:  
ERX-1440 router  
ERX-1410 router  
ERX-710 router  
ERX-705 router  
ERX-310 router  
All models use the same software. For information about the differences  
between the models, see Chapter 1, E-Series Overview.  
In the E-series documentation, the term ERX-14xx models refers to both  
the ERX-1440 router and the ERX-1410 router. Similarly, the term  
ERX-7xx models refers to both the ERX-710 router and the ERX-705  
router. The terms ERX-1440 router, ERX-1410 router, ERX-710 router,  
ERX-705 router, and ERX-310 router refer to the specific models.  
 
Documentation xvii  
E-Series Routers  
Table 2 Text conventions (except for command syntax) (continued)  
Convention  
Description  
Examples  
Italics  
Emphasize words.  
There are two levels of access,  
user and privileged.  
Identify variables.  
clusterId, ipAddress.  
Identify chapter, appendix, and  
book names.  
Appendix A, System Specifications.  
Table 3 Syntax conventions in Command Reference Guide  
Convention  
Description  
Examples  
Words in plain text  
Words in italics  
Represent keywords.  
Represent variables.  
terminal length  
mask, accessListName  
diagnostic | line  
Words separated by the | symbol  
Represent a choice to select one  
keyword or variable to the left or  
right of this symbol. (The keyword or  
variable may be either optional or  
required.)  
Words enclosed in [ brackets ]  
Words enclosed in [ brackets ]*  
Represent optional keywords or  
variables.  
[ internal | external ]  
[ level1 | level2 | l1 ]*  
Represent optional keywords or  
variables that can be entered more  
than once.  
Words enclosed in { braces }  
Represent required keywords or  
variables.  
{ permit | deny } { in | out }  
{ clusterId | ipAddress }  
Documentation  
The E-Series Installation Quick Start poster is shipped in the box with all  
new routers. This poster provides the basic procedures to help you get the  
router up and running quickly.  
With each software release, we provide the E-Series Routers  
Documentation CD (formerly ERX Edge Routers Documentation CD).  
The documentation CD contains the document set in PDF format and  
HTML format (with and without frames). From the HTML files, you can  
also access PDF files of individual chapters and appendixes.  
The documentation is also available on the Web. You can order a set of  
printed documents from your Juniper Networks sales representative.  
The document set comprises the following books:  
E-Series Installation and User Guide – Provides the necessary  
procedures for getting the router operational, including information on  
installing, cabling, powering up, configuring the router for  
 
 
xviii  
About This Guide  
management access, and general troubleshooting. Describes SRP  
modules, line modules, and I/O modules available for the E-series  
routers, and provides information about the compatibility of line  
modules and I/O modules with software releases. Lists the layer 2  
protocols, layer 3 protocols, and applications that line modules and  
their corresponding I/O modules support.  
E-Series System Basics Configuration Guide – Describes planning and  
configuring your network, managing the router, configuring passwords  
and security, configuring the router clock, and configuring virtual  
routers. Includes a list of references that provide information on the  
protocols and features supported by the router.  
E-Series Physical Layer Configuration Guide – Describes configuring  
physical layer interfaces.  
E-Series Link Layer Configuration Guide – Describes configuring link  
layer interfaces.  
E-Series Routing Protocols Configuration Guide, Vol. 1 – Provides  
information about configuring routing policy and configuring IP, IP  
routing, and IP security.  
E-Series Routing Protocols Configuration Guide, Vol. 2 – Describes  
BGP routing, MPLS, BGP-MPLS VPNs, and encapsulation of layer 2  
services.  
E-Series Policy and QoS Configuration Guide – Provides information  
about configuring policy management and quality of service (QoS).  
E-Series Broadband Access Configuration Guide – Provides  
information about configuring remote access.  
E-Series Command Reference Guide A to M; E-Series Command  
Reference Guide N to Z – Together comprise the E-Series Command  
Reference Guide. Contain important information about commands  
implemented in the system software. Use to look up command  
descriptions, command syntax, a command’s related mode, or a  
description of a command’s parameters. Use with the E-series  
configuration guides.  
E-Series Product Overview Guide – Gives a thorough overview of the  
router from a software and hardware perspective. It provides  
illustrations and configuration examples that present the “big picture.”  
 
Comments About the Documentation xix  
E-Series Routers  
MIBS  
Copies of the MIBs available in a software release are included on the  
JUNOSe Software CD (formerly ERX Edge Routers Software CD) and on  
the Web.  
Release Notes  
Release notes are included on the corresponding software CD and are  
available on the Web.  
In the Release Notes, you will find the latest information about features,  
changes, known problems, resolved problems, and system maximum  
values. If the information in the Release Notes differs from the  
information found in the documentation set, follow the Release Notes.  
Abbreviations  
Web Access  
A complete list of abbreviations used in this document set, along with  
their spelled-out terms, is provided in the E-Series System Basics  
Configuration Guide, Appendix A, Abbreviations and Acronyms.  
To view the documentation on the Web, go to:  
Comments About the Documentation  
We encourage you to provide feedback, comments, and suggestions so  
that we can improve the documentation to better meet your needs. Please  
e-mail your comments to:  
Along with your comments, be sure to indicate:  
Document name  
Document part number  
Page number  
Software release version  
 
xx  
About This Guide  
Contacting Customer Support  
For technical support, contact Juniper Networks at [email protected],  
or at 1-888-314-JTAC (within the United States) or 408-745-9500 (from  
outside the United States).  
 

Infinity Speaker System Primus Series User Manual
IRiver MP3 Player iFP 799 User Manual
Jacuzzi Hot Tub K272000AF 7 06 User Manual
JBL Portable Speaker 26OO User Manual
JVC VCR HR DVS3EK User Manual
Kenmore Washer 22 46262 User Manual
Kentrox Network Card AI232 User Manual
KitchenAid Coffeemaker VCCM12 User Manual
Klipsch Speaker System Quintet SL User Manual
Kodak Camera Accessories 6B8006 User Manual